Dr.N Mohan Rao
professor| Department | : | Mechanical Engineering |
| Qualification | : | Ph.D |
| Phone(Office) | : | 0884-2300854 |
| Mobile | : | 9849340437 |
| : | nmohan72@jntucek.ac.in | |
| Date of Birth | : | 24/06/1972 |
| Date of Joining | : | 23/11/2000 |
| Subjects Taught | : | Under Graduate Courses: Kinematics of Machinery; Dynamics of Machinery; Engineering Mechanics; Design of Machine members; Automobile Engineering; Hydraulic Machines; Finite Element Methods; Post Graduate Courses: Mechanical Vibrations; Advanced Mechanics of solids; Finite Element Methods; Computational Fluid Dynamics; Theory of Elasticity and Plasticity; |
| Research Area | : | Mechanics of Robot Parallelmanipulators, Mechanical Vibrations. |
| Teaching Experience | : | 24 |
| Research Experience | : | 14 |
| Industry/Professional Experience | : | 2 |
| Google Scholar link | : |
INTERNATIONAL JOURNALS:
1. Kumar, Kothuri Chenchu Kishor; Kumar, Bandlamudi Raghu; Rao, Nalluri Mohan; 2022; Microstructural, Mechanical Characterization, and Fractography of AZ31/SiC Reinforced Composites by Stir Casting Method; Silicon; Vol. 14; No. 9; pp. 5017-5027; Springer Netherlands
2. V. S. V. Satyanarayana, Rakesh Chandmal Sharma, B. Sateesh, L. V. V. Gopala Rao, N. Mohan Rao, Srihari Palli; 2022; “Optimum Response of a Nonlinear Passive Vehicle Suspension System under Random Road Excitations,” SAE Int. J. Commer. Veh. 16(1):2023, doi:10.4271/02-16-01-0004.
3. Kumar, Kothuri Chenchu Kishor; Kumar, Bandlamudi Raghu; Rao, Nalluri Mohan; 2021; Fabrication and Corrosion Characterization of AZ31 Mg Alloy SIC Reinforced Composites; Design Engineering; Vol. ; No. ; pp. 2556-2570;
4. Satyanarayana V, Gopala Rao L, Sateesh B, Mohan Rao N. 2021; Computation of passive suspension parameters for improvement of vehicle ride quality based on stochastic optimal controller with a look-ahead preview. Noise & Vibration Worldwide. Vol. 52(9), pp. 233-242. doi:10.1177/09574565211000390
5. Pundru, Srinivasa Rao; Nalluri, Mohan Rao; 2021; Synthesis of 3-PRS Manipulator Based on Revolute and Cone Angle of Spherical Constraints on Range of Rotational Motion of Spherical Joints; Journal of The Institution of Engineers (India): Series C; Vol. 102; No. 1; pp. 209-219; Springer
6. Satyanarayana, VSV; Sateesh, B; Rao, N Mohan; 2020; Passive suspension optimization of a quarter car using preview control with the spectral decomposition method; International Journal of Dynamics and Control; Vol. 8; No. 1; pp. 218-228; Springer Berlin Heidelberg
7. Kumar, Pacharu Ravi; Rao, Koganti Mohana; Rao, Nalluri Mohan; 2019; Effect of taper on free vibration of functionally graded rotating beam by Mori-Tanaka method; Journal of The Institution of Engineers (India): Series C; Vol. 100; No. 5; pp. 729-736; Springer India
8. Pundru, Srinivasa Rao; Nalluri, Mohan Rao; 2019; Synthesis of 3-PRS manipulator using exact method; Journal of The Institution of Engineers (India): Series C; Vol. 100; No. 6; pp. 1031-1042; Springer
9. Pundru, Srinivasa Rao; Nalluri, Mohan Rao; 2019; Synthesis of multi-positions 3-prismatic–revolute–spherical manipulator; SN Applied Sciences; Vol. 1; No. 9; pp. 44835; Springer
10. Prasad, V Jaya; Rao, N Mohan; Kamaluddin, S; Surya, KVP; 2018; A study of microstructure and tribological properties of Al 5083 MMC processed by direct extrusion; Materials Today: Proceedings; Vol. 5; No. 2; pp. 8232-8240; Elsevier
11. Suneetha Inuganti, Dr Kadiyala Ravi, Dr N Mohan rao. February 2019, "Effect of recycled rubber powder on mechanical and damping behavior of fibre reinforced composite", International Journal of Engineering Development and Research (IJEDR), ISSN:2321-9939, Vol.7, Issue 1, pp.320-324. URL :http://www.ijedr.org/papers/IJEDR1901058.pdf
12. SUNEETHA INUGANTI, KADIYALA RAVI & N. MOHANA RAO, Dec 2019, Experimental and analytical evaluation of strength and vibration parameters of Hybrid Monocomposite Leaf spring, International Journal of Mechanical and Production Engineering Research and Development, Vol. 9, Issue 6, pp. 1129–1142. ISSN (P): 2249-6890.
13. D.V.A., Ramasastry & KV, Ramana & Mohan Rao, Nalluri. (2019). Analysis and Prediction of Performance of MR Damper at Different Currents and Control Strategies for Quarter Suspension System of a Roadway Vehicle. International Journal of Vehicle Structures and Systems. Vol. 11(1), pp. 27-32, DOI: 10.4273/ijvss.11.1.06.
14. Satyanarayana, VSV; Sateesh, Bandaru; Rao, N Mohan; 2018; Parameters optimisation of vehicle suspension system for better ride comfort; International Journal of Vehicle Performance; Vol. 4; No. 2; pp. 186-199; Inderscience Publishers (IEL)
15. Balaji M, Murthy B, Rao NM. 2018. Multi response optimization of cutting parameters in drilling of AISI 304 stainless steels using response surface methodology. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. Vol. 232(1), pp. 151-161. doi:10.1177/0954405416636507
16. Chebattina, Kodanda Rama Rao; Srinivas, V; Rao, N Mohan; 2018; Effect of Size of multiwalled carbon nanotubes dispersed in gear oils for improvement of tribological properties; Advances in Tribology; Vol. 2018; No. ; pp. ; Hindawi
17. M. Balaji, K. Venkata Rao, N. Mohan Rao, B.S.N. Murthy, 2018, Optimization of drilling parameters for drilling of TI-6Al-4V based on surface roughness, flank wear and drill vibration, Measurement, Volume 114, Pages 332-339, ISSN 0263-2241, https://doi.org/10.1016/j.measurement.2017.09.051.
18. Prasad, V.J., Mohanarao, N., Kamaluddin, S. et al. 2018. Development of superplasticity in an Al–Mg alloy through severe plastic deformation. Int J Adv Manuf Technol Vol. 94, Issue 5–8, pp. 2973–2979 https://doi.org/10.1007/s00170-017-1060-0
19. Satyanarayana, V.s.V. & Sateesh, Bandaru & Mohan Rao, Nalluri. 2018. Parameters optimisation of vehicle suspension system for better ride comfort. International Journal of Vehicle Performance. Vol.4, No.2, pp.186 - 199. DOI: 10.1504/IJVP.2018.090956.
20. D.V.A., Ramasastry & Kv, Ramana & Mohan Rao, Nalluri & Kumar, M. & Reddy, V.S.S.. (2018). Evaluation of Human Exposure to Vibrations using Quarter Car Model with Semi-Active Suspension. International Journal of Vehicle Structures and Systems. Vol. 10(4), pp. 268-272.
DOI:10.4273/ijvss.10.4.08
21. V. Srinivas, Ch. Kodanda Rama Rao & N. Mohan Rao (2018), Lubricating and physico-chemical properties of CI- 4 plus engine oil dispersed with surface modified multi-walled carbon nanotubes, Tribology - Materials, Surfaces & Interfaces, Vol. 12, Issue 2, pp. 107-114, DOI: 10.1080/17515831.2018.1452847
22. Prasad, Damarla Kiran; Ramana, Kavuluri Venkata; Rao, Nalluri Mohan; 2018; Weight Function Approach for Semi Elliptical Crack at Blade Mounting Locations in Steam Turbine Rotor System; Periodica Polytechnica Mechanical Engineering; Vol. 62; No. 3; pp. 203-208;
23. Pundru, Srinivasa Rao; Nalluri, Mohan Rao; 2018; Spatial Three Degree of Freedom Parallel Manipulator Forward Kinematic Position Analysis; International Journal of Engineering & Technology; Vol. 7; No. 4.5; pp. 147-150;
24. Pundru, Srinivasa Rao; Nalluri, Mohan Rao; 2018; Three Degree of Freedom Spatial Parallel Manipulator Inverse Kinematic Position Analysis; International Journal of Engineering & Technology; Vol. 7; No. 4.5; pp. 98-101;
25. Kumar, P Ravi; Rao, K Mohana; Rao, N Mohan; 2017; Flapwise vibration of rotating functionally graded beam; Materials Today: Proceedings; Vol. 4; No. 2; pp. 3736-3744; Elsevier
26. Merneedi, Anjibabu; Nalluri, Mohan Rao; Vissakodeti, V; 2017; Free vibration analysis of an elliptical plate with cut-out; Journal of Vibroengineering; Vol. 19; No. 4; pp. 2341-2353; JVE International Ltd.
27. Kumar, P Ravi; Rao, K Mohana; Rao, N Mohan; 2017; Free vibration analysis of functionally graded rotating beam by differential transform method; Vol. ; No. ; pp. ; NISCAIR-CSIR, India
28. Prasad, V Jaya; Rao, N Mohan; Kamaluddin, S; 2017; A study of microstructure and tribological properties of stir cast Al metal matrix composite; Materials Today: Proceedings; Vol. 4; No. 8; pp. 9264-9271; Elsevier
29. V Jaya Prasad ,N Mohan Rao ,S Kamaluddin , (2017 ) " A Study of Microstructure and Tribological Properties of Stir Cast Al Metal Matrix Composite " , International Journal of Mechanical and Production Engineering (IJMPE) , pp. 110-113, Volume-5,Issue-4, DOIONLINE NO - IJMPE-IRAJ-DOIONLINE-7871
30. Prasad, V Jaya; Kamaluddin, S; Rao, N Mohan;2017; FINITE ELEMENT SIMULATION OF ALUMINIUM ALLOY SUBJECTED TO EQUAL CHANNEL ANGULAR PRESSING (ECAP); Vol. 8; No. 8; pp. 9-19;
31. Merneedi, Anjibabu; RaoNalluri, Mohan; Rao, VV; 2017; Free vibration analysis of a thin rectangular plate with multiple circular and rectangular cut-outs; Journal of Mechanical Science and Technology; Vol. 31; No. 11; pp. 5185-5202; Korean Society of Mechanical Engineers
32. Rao, K Venkata; Murthy, BSN; Rao, N Mohan; 2016; Experimental study on tool condition monitoring in boring of AISI 316 stainless steel; Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture; Vol. 230; No. 6; pp. 1144-1155; SAGE Publications Sage UK: London, England
33. M. Balaji, B.S.N. Murthy, N. Mohan Rao, 2016, Optimization of Cutting Parameters in Drilling of AISI 304 Stainless Steel Using Taguchi and ANOVA, Procedia Technology, Volume 25, Pages 1106-1113, ISSN 2212-0173, https://doi.org/10.1016/j.protcy.2016.08.217.
34. Rao, K Venkata; Murthy, BSN; Mohan Rao, N; 2015; Experimental study on surface roughness and vibration of workpiece in boring of AISI 1040 steels; Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture; Vol. 229; No. 5; pp. 703-712; SAGE Publications Sage UK: London, England
35. Ramesh Maganti, NV; Nalluri, Mohan Rao; 2015; Chordwise bending vibration analysis of functionally graded double-tapered rotating beams; International Journal for Computational Methods in Engineering Science and Mechanics; Vol. 16; No. 1; pp. 44835; Taylor & Francis
36. Maganti, NV; Nalluri, Mohan Rao; 2015; Flapwise bending vibration analysis of functionally graded rotating double-tapered beams; International Journal of Mechanical and Materials Engineering; Vol. 10; No. 1; pp. 44835; SpringerOpen
37. Rao, K Venkata; Murthy, BSN; Rao, N Mohan; 2014; Prediction of cutting tool wear, surface roughness and vibration of work piece in boring of AISI 316 steel with artificial neural network; Measurement; Vol. 51; No. ; pp. 63-70; Elsevier
38. Rao, Pundru Srinivasa; Rao, Nalluri Mohan, , Jan-Jun. 2014, Synthesis of a spatial 3-PRS parallel manipulator, International Journal of Mechanical Engineering and Materials Sciences, Vol. 7, No. 1, Pages 129-136, ISSN 0974-584X, Serial publications.
39. K. Venkata Rao, B.S.N. Murthy, N. Mohan Rao, (2014 ) " Prediction Of Work Piece Vibration In Boring of Aisi 316 Steel Using Artificial Neural Network " , International Journal of Mechanical and Production Engineering (IJMPE) , pp. 13-16, Volume-2,Issue-2.
40. Ramesh, MNV; Rao, N Mohan; 2014; Free vibration analysis of rotating functionally-graded cantilever beams; International journal of acoustics and vibration; Vol. 19; No. 1; pp. 31-41;
41. Rao, K Venkata; Murthy, BSN; Rao, N Mohan; 2013; Cutting tool condition monitoring by analyzing surface roughness, work piece vibration and volume of metal removed for AISI 1040 steel in boring; Measurement; Vol. 46; No. 10; pp. 4075-4084; Elsevier
42. Ramesh, MNV; Rao, N Mohan; 2013; Chordwise bending vibration analysis of functionally graded beams with concentrated mass; Procedia Engineering; Vol. 64; No. ; pp. 1374-1383; No longer published by Elsevier
43. Rao, Pundru Srinivasa; Rao, Nalluri Mohan; 2013; Position analysis of spatial 3-RPS parallel manipulator; International Journal of Mechanical Engineering and Robotics Research; Vol. 2; No. 2; pp. 80-90;
44. Ramesh, MNV; Mohan Rao, N; 2013; Free vibration analysis of pre-twisted rotating FGM beams; International journal of Mechanics and Materials in Design; Vol. 9; No. 4; pp. 367-383; Springer Netherlands
45. Goriparthi, Bhanu K; Suman, KNS; Rao, Nalluri Mohan; 2012; Effect of fiber surface treatments on mechanical and abrasive wear performance of polylactide/jute composites; Composites Part A: applied science and manufacturing; Vol. 43; No. 10; pp. 1800-1808; Elsevier
46. D.V.A., Ramasastry & Kv, Ramana & Mohan Rao, Nalluri. (2012). A Study on Magnetorheological Fluid (MRF) Damper. International journal of current research and review. Vol. 04, issue 05. 93-100.
47. Goriparthi, Bhanu K; Suman, KNS; Nalluri, Mohan Rao; 2012; Processing and characterization of jute fiber reinforced hybrid biocomposites based on polylactide/polycaprolactone blends; Polymer composites; Vol. 33; No. 2; pp. 237-244; Wiley Subscription Services, Inc., A Wiley Company Hoboken
48. Rao, Nalluri Mohan; 2011; Synthesis of a spatial 3-RPS parallel manipulator based on physical constraints using hybrid GA simplex method; The International Journal of Advanced Manufacturing Technology; Vol. 52; No. 5; pp. 777-787; Springer-Verlag
49. GB Kiran, KNS Suman, NM Rao, RUM Rao, 2011, A study on the influence of hot press forming process parameters on mechanical properties of green composites using Taguchi experimental design, International Journal Of Engineering, Science And Technology (Nigeria), Vol. 3, No. 4, pp. 253-263. DOI: 10.4314/ijest.v3i4.68557
50. M. Amrita; N. Mohan Rao, 2011, Optimal design of multilayered composite plate using bio-inspired optimisation techniques, International Journal of Bio-Inspired Computation (IJBIC), Vol. 3, No. 5, Inderscience Publishers.
51. N. Mohan Rao, 2011, Direct kinematics of a spatial 3-RPS parallel robot manipulator with general geometry, International Journal of Mathematical Modeling, Simulation and Applications, Vol. 4, No.3.
52. Mohan Rao, Nalluri; 2010; Synthesis of a spatial 3-RPS parallel manipulator based on physical constraints; Sadhana; Vol. 35; No. 6; pp. 739-746; Springer-Verlag
53. Chennaiah, M Bala; Rao, N Mohan; Kumar, V Sudheer; Hema, D; Sreenivasulu, A; 2010; Free Vibration Analysis of a Bernoulli-Euler Beam Carrying a two degree-Of-freedom Spring Mass System; International Journal of Mechanics and Solids; Vol. 5; No. 2; pp. 81-94;
54. Goriparthi, Bhanu K; Suman, KNS; Nalluri Mohan Rao, Effect of ultrasonication of jute fibres on mechanical properties of natural fibre composites, International Journal of Mechanical & Automobile Engineering, Volume 07, Issue No 1, Dec. 2009- Feb.2010, pp.1-8
55. Ramesh, MNV; Nalluri Mohan Rao; Static analysis of transversely loaded functionally graded beam with different end conditions, International Journal of Mechanical & Automobile Engineering, Volume 07, Issue No 1, Dec.2009-Feb.2010, pp. 17-20
56. Nalluri Mohan Rao; Synthesis of a general spatial 3- RPS parallel manipulator, International Journal of Mechanical & Automobile Engineering, Volume 07, Issue No 1, Dec.2009-Feb.2010, pp. 13-17
57. Rao, Nalluri Mohan; Rao, K Mallikarjuna; 2009; Dimensional synthesis of a spatial 3-RPS parallel manipulator for a prescribed range of motion of spherical joints; Mechanism and Machine Theory; Vol. 44; No. 2; pp. 477-486; Pergamon
58. Rao, Nalluri Mohan; Mallikarjuna Rao, K; 2006; Multi-position dimensional synthesis of a spatial 3-RPS parallel manipulator; Journal of mechanical design; Vol. 128; No. 4; pp. 815-819; American Society of Mechanical Engineers
NATIONAL JOURNALS:
1. Mangalagiri, Balaji & Murthy, B.S.N & Mohan Rao, Nalluri. (2016). Optimization of Cutting Parameters in Drilling of Ti- 6Al-4V Alloy using Taguchi and ANOVA. Journal of Advances in Mechanical Engineering and Science. Vol. 2(4), 2016, pp. 1-10. DOI:10.18831/james.in/2016041001
2. Ramesh, MNV; Nalluri Mohan Rao; Flapwise bending vibration analysis of rotating functionally graded beams with concentrated mass, CSIR- Journal of Structural Engg, Vol. 41, no. 6, Feb-March 2015 pp. 592-600, ISSN 0970-0137.
3. Mandalaparthy, Harish; Rao, N Mohan; 2016; Kinematic Analysis and Workspace of a New Four Legged 3-Dof Parallel Manipulator with No Parasitic Motions; i-Manager's Journal on Future Engineering and Technology; Vol. 11; No. 4; pp. 39; iManager Publications
4. Ramesh, MNV; Rao, Nalluri Mohan; 2013; Chordwise Bending Vibration Analysis of Rotating Double Tapered Beams Using Ritz Method; i-Manager's Journal on Future Engineering and Technology; Vol. 8; No. 4; pp. 22; iManager Publications
5. Rao, Nalluri Mohan; Rao, KV Nageswara; 2013; Testing The Performance Of Plant Growth Optimization Algorithm; i-Manager's Journal on Future Engineering and Technology; Vol. 8; No. 4; pp. 16; iManager Publications
6. Rao, N Mohan; Rao, KV Nageswara; 2012; Dimensional Synthesis Of A Slider-Crank Mechanism Using Plant Growth Optimization; i-Manager's Journal on Mechanical Engineering; Vol. 2; No. 2; pp. 13; iManager Publications
7. Rao, Nalluri Mohan; 2010; Kinematic Synthesis of a Spatial 3-rps Parallel Manipulator Using Particle Swarm Optimization; i-Manager's Journal on Future Engineering and Technology; Vol. 5; No. 4; pp. 35; iManager Publications
8. Ramesh, MNV; Rao, N Mohan; 2009; Static Analysis of Functionally Graded Cantilever Beam Using Finite Element Method; i-Manager's Journal on Future Engineering and Technology; Vol. 4; No. 4; pp. 54; iManager Publications
| Workshops/Courses Attended | : | List of Refresher/orientation/ Short term courses attended 1. Short term training programme (AICTE-STTP) on Advances in composite materials from 03-12-2001 to 07-12-2001 (one week) at IIT Madras 2. AICTE-STTP on FEM- and its Advanced applications from Jan 7-12,2002 (one week) at IIT Kanpur 3. AICTE-STTP on Design and manufacture of composite components from 23-6-2003 to 27-06-2003 (one week) at PSG College of Technology 4. AICTE-STTP on Modeling and optimization of manufacturing systems using conventional and non conventional techniques from 10-11-2003 to 21-11-2003 (2 weeks) at JJ College of Engg. and Tech. Thirichirapalli. 5. UGC Refresher course on Environmental Management from 17-11-2004 to 7-12-2004 (Three weeks) at JNTU Hyderabad 6. UGC orientation course in Value Education from 2-12-2005 to 30-12-2005 (Four weeks) at ASC, Osmania University, Hyderabad 7. UGC Refresher course on Innovation and Technology Management from 13-10-2008 to 04-11-2008 (Three weeks) at JNTU Hyderabad 8. AICTE-STTP on Alternative fuels of IC Engines & their impact on environment from 17-21 June 2008 (one week) at JNTU College of Engg., KAKINADA 9. UGC Refresher course in Environmental studies from 25-7-2008 to 16-8-2008 (Three weeks) at ASC, Osmania University, Hyderabad 10. National Programme for Training of Scientists and Technologists Creativity & Innovation Management in Research, DST Sponsored programme for One week at Engineering Staff College of India, Hyderabad List of workshops attended: 1. Participation in the workshop on “The establishment of centers of excellence” under TEQIP by AU College of Engg., Vizag During 29-30 Nov., 2012 2. One day national workshop on OUTCOME BASED ENGINEERING EDUCATION Conducted at JNTUK UCE VIZIANAGARAM on 17-02-2013. 3. Three day faculty development on Soft skills for effective teaching at JNTUK- UCE V, 12-15 June 2013 4. Two day Orientation programme for faculty at JNTUK-UCEV in association with IUCEE during 16-17 July 2013 5. Work shop for Training resource persons on outcome based accreditation-Phase I Phase I: 13 Sep. 2013 conducted by NBA Nodal Centre, JNTUK 6. Work shop for Training resource persons on outcome based accreditation --Phase II Phase II: 26th -28th Sept. 2013 conducted by NBA Nodal Centre JNTUK 7. One day national workshop on OUTCOME BASED ENGINEERING EDUCATION Conducted at JNTUK UCE VIZIANAGARAM on 17-02-2013. |
| Workshops/Conferences Organized | : | List of conferences conducted: 1. National conference on ‘Recent trends in CAD/CAM at JNTU College of Engineering, Kakinada 2002 as Co-ordinator 2. National conference on ‘Advances in CAD/CAM’ at JNTU College of Engineering, Kakinada. 2006 as Co-ordinator 3. National conference on Recent Advances in Mechanical Engineering (NCRAME-14) at Dept. of Mechanical Engineering, JNTUK UCE Vizianagaram 22nd March 2014 as Chairman Workshops conducted: 1. A Two day national workshop on Genetic Algorithms and its Applications at JNTU College of Engineering, Kakinada during 27-28 July 2006 as Co-ordinator 2. A Two day national workshop on Advances In Manufacturing Processes at Univ. College of Engineering, Vizianagaram, JNTUK during 28th Feb - 1st March 2014 as Chairman Technical Symposia conducted: 1. Student technical symposium MECHANO MMXIII at Univ. College of Engineering, Vizianagaram, JNTUK in 2013 as Chairman 2. Student technical symposium MECHANO MMXIV at Univ. College of Engineering, Vizianagaram, JNTUK in 2014 as Chairman 3. Student technical symposium MECHANO MMXIV at Univ. College of Engineering, Vizianagaram, JNTUK in 2015 as Chairman _______________________________________________________________________________________________________________ |
| Conferences | : | INTERNATIONAL CONFERENCES: 1. M. Amrita, N. Mohan Rao; 2009; Optimal design of a multi-layer composite plate using Particle Swam optimization; International Conference on Computational Methods in Engineering and Sciences Chaitanya Bharathi Institute of Technology Hyderabad; pp.37-48. 2. NSS venkateshwar, N Mohan Rao; 2010; Development of an effective method for the capture and storage of Co2 emissions in thermal power plants; ICETEE 2010, Sri Sai Ram Engineering College West Tambaram, Chennai 3. D.V.A. Ramasastry, KV Ramana & Nalluri Mohan Rao; 27-29th Dec. 2010; Magneto Rheological Dampers for Vehicular Applications: Simulation and Comparison of Bingham and Bouc-Wen Models Using MATLAB Simulink; International Conference on Theoretical Applied Computational Experimental Mechanics IIT Kharagpur; pp. 787-789. 4. D.V.A. Ramasastry, KV Ramana & Nalluri Mohan Rao; 24-26th February, 2011; Magneto Rheological fluid damper as vibration isolator – A review; International Conference on Multi Body Dynamics, Organised by K L University, Vijayawada, Andhra Pradesh; pp. 223-229. 5. P. Srinivasa Rao, N Mohan Rao; January 7-9, 2013; Kinematic Analysis of 3-Degree of Freedom Spatial Parallel Manipulator; 3rd International conference on Recent Advances in Material Processing Technology (RAMPT'13) Organised by National Engineering (Autonomous) College, Kovilpatti, Tamilnadu, pp: 1-9. 6. Prasad, V Jaya; Kamaluddin, S; Rao, N Mohan; Enhancement of Microstructural And Mechanical Properties Through Equal Channel Angular Extrusion Process of Aluminium Alloy; Proceedings of International Conference on Advances in Materials, Manufacturing and Applications (AMMA 2015), April 9-11, 2015 pp. 1069-1076; NATIONAL CONFERENCES: 1. Sundar Singh, N Mohan Rao; February, 2006; Value engineering application in vacuum Brake booster Design using CAD; National Conference on Advances in CAD/CAM, JNTU College of Engineering Kakinada, A.P; pp. 229-244. 2. Goriparthi Bhanu K; Suman, KNS; Nalluri Mohan Rao; 2009; Effect of static and dynamic Alkali treatment on mechanical properties of Jute/Polyester Composites; NCAMT-2009 organised by SHRI MATA VAISHNO DEVI UNIVERSITY KARTA, J&K, INDIA; 3. D.V.A. Ramasastry, KV Ramana & Nalluri Mohan Rao; 22nd March 2014; Modeling and simulation of a quarter car using MR damper; National conference on recent advances in Mechanical Engineering (NCRAME-14) Organized by Dept. of Mechanical Engineering, Vizianagaram; pages: 254-257 4. N. Mohan Rao; 18th & 19th December, 2014; Design of spherical four bar mechanism for path generation using Genetic algorithms; Second National Conference on Innovations in Mechanical Engineering NCIME’ 14 Organised by Madanapalle Institute of Technology and Science Department of Mechanical Engineering; Pages: 251-256. |
| Session Chair/Keynote Speaker/Guest Lecture | : | Invited Lectures delivered 1 Title of Lecture / Academic Session: Optimization using Genetic Algorithms Title of Conference / Seminar etc: UGC sponsored three-week Refresher Course on Advanced optimisation techniques for engineering systems Date (s) of the event: 08-06-2006 (2.00 to 5.15 p.m.) Organized by: UGC- Academic Staff College, J.N.T.U., Hyderabad 2 Title of Lecture / Academic Session: Synthesis of parallel manipulators – optimisation using GA Title of Conference / Seminar etc: UGC sponsored three-week Refresher Course on Design and Applications of Robotic Systems and Advanced Mechanisms Date (s) of the event: 28-03-2010 Organized by: UGC- Academic Staff College, J.N.T.U.H., Hyderabad. 3 Title of Lecture / Academic Session: Design of 3-DOF parallel manipulators Title of Conference / Seminar etc: A two National workshop on Advanced finite element applications in Design and Manufacturing systems Date (s) of the event: 26th - 27th April 2012 Organized by: Department of Mechanical Engg, JNTUK University College of Engineering, KAKINADA 4 Title of Lecture / Academic Session: Optimization of machining process parameters using Genetic Algorithms Title of Conference / Seminar etc: A Two day national workshop on ADVANCES IN MANUFACTURING PROCESSES Date (s) of the event: 28th Feb - 1st March 2014 Organized by: Department of Mechanical Engg, JNTUK University College of Engineering, VIZIANAGARAM 5 Title of Lecture / Academic Session: Automotive transmission systems (Session 2 on 25th March 2014) Title of Conference / Seminar etc: Automobile workshop of National level student technical symposium MECHANO 2014 Date (s) of the event: 25th-26th March 2014 Organized by: Department of Mechanical Engg, JNTUK University College of Engineering, VIZIANAGARAM 6 Title of Lecture / Academic Session: Suspension and human comfort systems (Session 4 on 26th March 2014) Title of Conference / Seminar etc: Automobile workshop of National level student technical symposium MECHANO 2014 Date (s) of the event: 25th-26th March 2014 Organized by: Department of Mechanical Engg, JNTUK University College of Engineering, VIZIANAGARAM 7 Title of Lecture / Academic Session: Chair for technical sessions on 7th March 2014 Title of Conference / Seminar etc: National conference on recent trends in Mechanical Engineering (NCRTME – 2014) Sponsored by AICTE, New Delhi. Date (s) of the event: 7th- 8th March 2014 Organized by: MRAGR GOVERNMENT POLYTECHNIC VIZIANAGARAM ______________________________________________________________________________________________________________ |
| Ph.D Scholars guided | : | 12- Completed, 10 - Ongoing |
| PG Scholars guided | : | 50 |
| Memberships in Professional bodies | : | Member of INSITUTION OF ENGINEERS (INDIA) Memb No. M-140969-1 _______________________________________________________________________________________________________________ |
| Positions held | : | 1. N.S.S programme officer for 3 years at University College of Engineering, Kakinada. 2. Dy. Warden to Hostels for 3 years at University College of Engineering, Kakinada. 3. Officer-In-Charge of Hostels for 1 year 6 Months (20-08-2007 to 05-02-2009) at University College of Engineering, Kakinada 4. Additional controller of Examinations, JNTU KAKINADA for the past 3 years (05-02-2009 to 28 Feb 2012) 5. TEQIP Co-ordinator at University College of Engineering, Kakinada for 11 Months (28-1-2012 to 30-1-2012) 6. Head of Mechanical Engineering Department, UCE Vizianagaram, JNTU Kakinada for 3 years (30-1-2013 to 10-3-2016) 7. Controller of Examinations, JNTU KAKINADA for 3 Years 9 Months (March-2016 to Dec. 2019) 8. Director (Industry Institute Interaction, Placement & Training), JNTU KAKINADA for 2 Years (Dec. 2019 to Dec. 2021) 9. Special Officer - Alumni Relations Cell, JNTU KAKINADA from Dec. 2021 ______________________________________________________________________________________________________________ |
| Patents | : | Design publications in Journal of Intellectual Patents INDIA: 2 1. Published in The Patent Office Journal No. 40/2021 Dated 01/10/2021 page no. 46348 DESIGN NUMBER 347218-001 CLASS 15-05 1.TIRUVIDULA ESWARA RAO, DEPT., OF MECHANICAL ENGINEERING, KONERU LAKSHMAIAH EDUCATION FOUNDATION, VADDESWARAM, GUNTUR DIST., ANDHRA PRADESH, 522502 2. NALLURI MOHAN RAO, DEPARTMENT OF MECHANICAL ENGINEERING, UNIVERSITY COLLEGE OF ENGINEERING, JAWAHARLAL NEHRU TECHNOLOGICAL (JNT) UNIVERSITY KAKINADA, KAKINADA, ANDHRA PRADESH, 533 003 DATE OF REGISTRATION 03/08/2021 TITLE CAR CLEANING ROBOT 2. Published in The Patent Office Journal No. 45/2021 Dated 05/11/2021 page no. 53410 DESIGN NUMBER 339641-001 CLASS 15-99 1.T. ESWARA RAO, DEPT., OF MECHANICAL ENGINEERING, KONERU LAKSHMAIAH EDUCATION FOUNDATION, VADDESWARAM, GUNTUR DIST., ANDHRA PRADESH, 522502 2. NALLURI MOHAN RAO, DEPARTMENT OF MECHANICAL ENGINEERING, UNIVERSITY COLLEGE OF ENGINEERING, JAWAHARLAL NEHRU TECHNOLOGICAL (JNT) UNIVERSITY KAKINADA, KAKINADA, ANDHRA PRADESH, 533 003 3. V GIRDHAR SURYA, PLOT NUMBER : 409, R R TOWERS, NEAR OLD BUS STAND, MANGALAGIRI, 522503, ANDHRA PRADESH 4. T. KRISHNA KAUSHIK, DEPT., OF MECHANICAL ENGINEERING, KONERU LAKSHMAIAH EDUCATION FOUNDATION, VADDESWARAM, GUNTUR DIST., ANDHRA PRADESH, 522502 DATE OF REGISTRATION 23/02/2021 TITLE ANTHROPOMORPHIC THREE FINGER ROBOT HAND ______________________________________________________________________________________________________________ |
| Foreign Visits | : | Attended UKIERI Higher Education Leadership Development Programme conducted by Leadership Foundation for Higher Education, UK. Module 1 at New Delhi during 8-12 Feb. 2016 and Module 2 at Birmingham, UK during 25-29 April 2016. |